These LED fog lights fit for all motorcycles with crash bar or similar mounting possibility. The set consists of two additional LED lights, which can be mounted to crash bars (diameter 21-25mm). They will be connected to the battery. The switch will be mounted onto your handlebar. These lights do not require any change of the electric system of your motorcycle. If you do not want the headlights to possibly be switched on when the motorcycle is switched off, we recommend using the CLS Connect module, item number 127.00.010.
With EG homologation.
Shipping:
Mounting instructions
2x LED fog lights (12V, 14W)
Wiring
Switch (switch mounting only for tubular handlebars)
Install Instruction
Note: The fixation clamps are also suitable for a pipe diameter of 27mm. All you need to do is use a M6x50 Allen screw (instead of the supplied M6x45) (see image 3).
If the plus cable of the headlights is too short for your motorcycle, you can extend it with our item S23004138. Our cable ties (item 3800105 / 3800115) are also helpful for mounting the headlights.
Reflector red, rectangular, self-adhesive, with E-mark...
These halogen lights fit for all motorcycles with crash bar...
This sequential LED indicator, with its LEDs shining from...