SP Connect Bar Clamp Mount Pro for BMW F650GS (08-12), F700GS & F800GS (08-18)

All Bikes

The SP Connect Bar Clamp Mount Pro is the perfect way to attach your smartphone to the motorcycle in a matter of seconds, flexibly and intuitively. The Bar Clamp Mount Pro can be mounted on the handlebar clamp and offers a pivoting and rotating head in order to be able to position the smartphone optimally. The smartphone can be fixed in both portrait and landscape format.

The Bar Clamp Mount Pro has an M8 fastening screw that can be fastened in an M8 thread. Please check whether your motorcycle has a corresponding M8 thread!

Install Instruction SP Connect Bar Clamp Mount Pro

Note: If a smartphone with a mechanical image stabilizer is attached to the Bar Clamp Mount Pro, we recommend using an additional vibration-dampening module (item 688066) to best prevent damage to the smartphone's camera that can be caused by vibrations from motorcycle engines. The Anti Vibration Module reduces vibrations by up to 60%. The head of the Bar Clamp Mount Pro is easily interchangeable with the anti-vibration module, which allows the smartphone to be fixed directly on the vibration-damping module with a 90° clockwise rotation. However, if problems occur, the Bar Clamp Mount Pro should no longer be used in combination with this smartphone!

Install Instruction SP Anti Vibration Module

Either the SP Universal Phone Case, the SP Universal Interface or the SP Universal Phone Clamp can be used to attach the smartphone to the Bar Clamp Mount Pro.

The SP Universal Phone Case is available in two sizes. Item 688060921 offers space for smartphones with a maximum size of approx. 153 x 70 mm, while item 688060922 is designed for smartphones with a maximum size of approx. 165 x 80 mm. The SP Universal Phone Cases protect the phone from rain, sweat, mud and dust, offer good touchscreen usability and have a camera window and a protective fleece insert. The smartphone is pushed into the case, the opening is rolled up and then fixed with the Velcro surface.
Note: Wireless charging is not guaranteed when using this product.

Install Instruction SP Universal Phone Case

The SP Universal Interface makes any phone case or other device compatible with the SPC+ system. This is a flat and robust pad that is equipped with a 3M adhesive film for flexible use. For installation, the protective film of the adhesive pad is removed and pressed onto the back of the smartphone case or other device. For best results, it should be positioned as centrally as possible.
Note: Wireless charging is not guaranteed when using this product.
Attention: The use of the SP Universal Interface is at your own risk! Observe the information in the installation instructions!

Install Instruction SP Universal Interface

The SP Universal Phone Clamp SPC+ fits smartphones with a maximum thickness of 12mm and a width between 58 and 85mm. The smartphone clamp mount has a simple and rock-solid locking system: simply pull out the crown, screw it tight and fix the crown by pushing it in. The clamp bracket can be adjusted without tools.
Note: Wireless charging is not guaranteed when using this product.

Install Instruction SP Universal Phone Clamp

Questions about this article

Ratings

Rating:
The average rating of this product is 0 of 5:
(after 0 Ratings)

---

Make a new evaluation

Product safety information

Related / Recommended Products

SP Connect Mirror Mount

The SP Connect Mirror Mount is the perfect way to attach...

Price € 29,90
without VAT plus shipping

Show details

DVISION Head-Up Display

With the TILSBERK head-up display, you always keep the focus...

Special price € 349,00
instead of € 399,90
without VAT plus shipping

Show details

GPS Mounting Adventure

BMW F800GS Adventure Bikes

Easy and fast mounting is possible with our new GPS mounting...

Price € 49,90
without VAT plus shipping

Show details