With this wireless charging pad you can conveniently charge your smartphone wirelessly by simply placing it on the charging pad. The charging pad fits ideally into the small storage compartment of the BMW R1300GS and has a cable with a length of about 35cm and a USB Type A connection plug. It supports the QI charging standard with 15W / 7.5W / 10W / 5W and, depending on the device, delivers up to 15W charging power. The charging pad does not heat up during the charging process because the charging electronics are housed in the USB cable. We tested the charging pad on BMW R1300GS. No quiescent current can be measured, making the charging pad ideal for lithium-ion starter batteries.
Size: approximately 158mm x 78mm x 6.5mm
Not suitable for smartphones with magnetic cases, metal cases, cases thicker than 4mm and with holding or stand aids attached to the case. These must be removed in advance, as well as credit cards or other cards with magnetic stripes!
Only suitable for smartphones with wireless charging function!
The foam (as shown in pictures 2 & 3) can be used for smaller devices so that they cannot slip on the charging pad. The charging pad is fixed with the help of two silicone pads (see picture 4) and firmly stays in place thanks to its silicone back.
The original BMW rubber mat can still be used on the charging pad as long as the distance between the smartphone and the charging pad remains less than 4mm.
If your motorcycle has a USB-C socket instead of a USB-A socket, please order the adapter (item number USB.CA) in addition to the charging pad.
Item 90018: Battery charger Optimate 4 Quad Program...
This kit features a standard 12 volt socket and allows you...
This USB tank bag cable is on one side equipped with the DIN...