Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.
Spares for BMW S1000RR (2009-2018)
| BMW S1000RR 2017-2018 |
| 999 |
| 4 |
| 199 |
| 146 |
| 208 |
| 815 |
| 1200 ± 50 |
| Injection 48 mm |
| 2,5 |
| 2,9 |
| NGK LMAR9D-J |
| - |
| 46 mm USD fork |
| Chain |
| - |
| SAE 5W-40 |
| 3,5 L MIN. API SL |
| - |
| DOT 4 |
| - |
| 17.5 |
| water+ |
Setting service-due date and countdown distance | |
Deleting limit for running-in rpm | |
Performing vehicle test with BMW Motorrad diagnostic system | |
Engine-oil change, with filter | |
Readjusting steering-head bearing | |
Checking brake-fluid level, front and rear brakes | |
Checking play of throttle cable | |
Checking fastener of clutch lever fitting | |
Lubricating clutch mechanism | |
Checking clutch cable and clutch-lever play | |
Lubricating side stand | |
Checking coolant level | |
Checking chain sag | |
Checking tire pressures and tread depth | |
Check the lights and signaling equipment | |
Function test, engine start suppression | |
Final inspection and check of roadworthiness | |
Confirming BMW Service in on-board documentation |
Performing vehicle test with BMW Motorrad diagnostic system | |
Oil change in engine with filter | |
Replace air filter cartridge | |
Visually inspect the brake pipes, brake hoses and connections | |
Checking front brake pads and brake discs for wear | |
Checking rear brake pads and brake disc for wear | |
Changing brake fluid, front and rear brakes (initially after 1 year, then every 2 years) | |
Checking steering-head bearing | |
Checking coolant level | |
Checking play of throttle cable | |
Checking fastener of clutch lever fitting | |
Checking clutch cable and clutch-lever play | |
Lubricating clutch mechanism | |
Checking drive chain, sprocket and pinion | |
Checking tire pressures and tread depth | |
Checking ease of movement of side stand | |
Lubricating side stand | |
Check the lights and signaling equipment | |
Function test, engine start suppression | |
Final inspection and check of roadworthiness | |
Setting service-due date and service countdown distance | |
Checking battery charge state | |
Confirming BMW Service in on-board documentation |
Performing vehicle test with BMW Motorrad diagnostic system | |
Oil change in engine with filter | |
Checking valve clearance (every 30.000 km) | |
Checking valve timing (cylinder head cover removed) (every 30.000 km) | |
Replace all spark plugs | |
Replace air filter cartridge | |
Changing fluid in telescopic forks | |
Visually inspect the brake pipes, brake hoses and connections | |
Checking front brake pads and brake discs for wear | |
Changing brake fluid, front and rear brakes (initially after 1 year, then every 2 years) | |
Checking rear brake pads and brake disc for wear | |
Checking steering-head bearing | |
Checking coolant level | |
Checking play of throttle cable | |
Checking fastener of clutch lever fitting | |
Checking clutch cable and clutch-lever play | |
Lubricating clutch mechanism | |
Checking drive chain, sprocket and pinion | |
Checking tire pressures and tread depth | |
Checking ease of movement of side stand | |
Lubricating side stand | |
Check the lights and signaling equipment | |
Function test, engine start suppression | |
Final inspection and check of roadworthiness | |
Setting service-due date and service countdown distance | |
Checking battery charge state | |
Confirming BMW Service in on-board documentation |